Quick Details


DC Gearbox Motor

Place of Origin:

Zhejiang, China

Model Number:


Brand Name:


Packaging & Delivery

Selling Units:
Single item
Single volume:
Single gross weight:
Lead Time
Quantity(Pieces) 1 – 500 >500
Est. Time(days) 30 To be negotiated

Online Customization

These durable (but affordable!) plastic gearbox motors (also known as ‘TT’ motors) are an easy, low-cost way to get your projects moving. This is a TT DC Gearbox Motor with a gear ratio of 1:48, and it comes with 2 x 200mm wires with breadboard-friendly 0.1" male connectors. Perfect for plugging into a breadboard or terminal blocks.

You can power these motors with 3VDC up to 6VDC, they’ll of course go a little faster at the higher voltages. We grabbed one motor and found these stats when running it from a bench-top supply

At 3VDC we measured 150mA @ 120 RPM no-load, and 1.1 Amps when stalled
At 4.5VDC we measured 155mA @ 185 RPM no-load, and 1.2 Amps when stalled
At 6VDC we measured 160mA @ 250 RPM no-load, and 1.5 Amps when stalled
Note that these are very basic motors, and have no built-in encoders, speed control or positional feedback. Voltage goes in, rotation goes out! There will be variation from motor to motor, so a separate feedback system is required if you need precision movement.

Comes 1 x per order, with just the motor + wires. You cannot drive these directly from a microcontroller, a high-current motor driver is required! We recommend our DRV8833 motor driver for these motors, as it works well down to 3V and can be set up with current limiting since the stall current on these can get high. The TB6612 can also be used, it’s on our shields and wings, but you’ll need to supply at least 4.5V – which is what you’ll likely want to run these motors at anyhow!

We have a range of wheels, add-ons and accessories for these motors so you can bling out your bot just the way you like.

Rated Voltage: 3~6V
Continuous No-Load Current: 150mA +/- 10%
Min. Operating Speed (3V): 90+/- 10% RPM
Min. Operating Speed (6V): 200+/- 10% RPM
Torque: 0.15Nm ~0.60Nm
Stall Torque (6V): 0.8kg.cm
Gear Ratio: 1:48
Body Dimensions: 70 x 22 x 18mm
Wires Length: 200mm & 28 AWG
Weight: 30.6g /1.1oz

Why choose us ?

1. All products have quality certification

2.Rich experience on printing logo on product and OEM package.

3.Enough experience for the needs of Raspberry Pi products and open numbers of mold to meet specific requests of Raspberry Pi users.

4.Exclusive products : Raspberry Pi Zero Camera, Fish Eye Camera, Raspberry Pi 7 inch Screen, Raspberry Pi Case, Zero Kits,

Zero Pin Header and do the custom OEM starter kits including LED kits, Resistor kits, Robot kits, Wire spool kits, Raspberry Pi Starter kits etc


Q1.Do you offer samples? is it free or extra?
A1:Yes.we could offer samples with free charge,However, buyer should responsible for shipping freight.

Q2:How to proceed an order?
A2:Firstly, let us know your requirements or application. Secondly, we quote according to your requirements or our suggestions. Thirdly, customer confirms the samples and pay deposit for the official order. Finally, we arrange the production and ship once it’s ready.

Q3:Do you offer OEM service?
A3:Yes, Sure! Rich experience on printing logo on product and OEM package.

Q4:How many days I can get the goods after payment?
A4:Usually, goods will be shipped within 3 days. By DHL will take about 3~5 days. So total will take about 4~8 days to arrive at your hands.

Q5:Could I get your Photos about the product without the watermark to my website?
A5:Of course, we could do this for you.

Q6:What is your terms of payment ?
A6:For small amount orders, 100% better paid by PayPal or T/T in advance. For large amount orders like more than 10000 USD, 30% T/T in advance , balance fully paid before shipment.

Q7:How do you guarantee my goods right?
A7:Order will be arranged exactly as requested, Also we will take you photos if necessary before delivering out.